Hood & Parker County, Texas
Well Pressure Tank Repair & Replacement
Short-cycling pump, swinging water pressure, or a pressure switch that won't behave — we diagnose and fix the pressure tank, switch, and control setup that's really behind most well pressure complaints.
- Short-cycling & waterlogged bladder tank repair
- Pressure switch & control box diagnosis
- Same-day fixes for most tank & switch failures
- Upfront quotes before any work starts
Get a Free Quote
Tell us what's going on — we'll call you back fast.
The Real Culprit
Well Pressure Tank Problems Behind Most Pressure Complaints
When a well system starts acting up — pressure that swings, a pump that seems to run constantly, or water that sputters before catching — the pressure tank and its switch are usually where the problem actually lives, even when the symptom feels like a pump issue. A correctly charged pressure tank stores water under air pressure so your pump doesn't have to turn on every time you open a faucet. When that tank loses its air charge, everything downstream of it starts misbehaving.
Short-Cycling
Your pump switching on and off rapidly — sometimes several times a minute — instead of running a normal cycle and resting. This is the single most common pressure tank complaint we see, and it's hard on every component downstream.
Waterlogged Bladder Tanks
When a tank's internal bladder fails, the tank loses its air cushion and fills mostly with water instead. It can no longer buffer the pump's cycle, which is what triggers short-cycling in the first place.
Pressure Switches
The switch tells the pump when to start and stop based on tank pressure. A worn or miscalibrated switch can cause short-cycling, no water, or a pump that won't shut off — even with a healthy tank.
Low-Pressure Complaints
Weak flow at the tap can trace back to a low air charge, a switch set below what your household needs, or a tank that's simply undersized for the property. We test each before recommending a fix.
Why It Matters
Short-Cycling Shortens Pump Life
A well pump is built to start, run, and rest in a normal rhythm. Short-cycling forces the motor and starting components to work through repeated on/off bursts, which is one of the fastest ways to wear out an otherwise healthy pump — a pump that could have lasted 8 to 15 years can fail in a fraction of that time under constant short-cycling. Fixing a bad pressure tank or switch early is often what keeps a pump replacement from becoming necessary at all. If the pump has already been damaged, see our well pump repair page.
Repair or Replace
We Diagnose Before We Recommend
Not every pressure tank problem means a new tank. A weak air charge can sometimes be recharged on site. A bad switch or control box can often be swapped on its own without touching the tank. But once a bladder has actually ruptured or failed, the tank itself needs replacing — recharging a failed bladder tank doesn't fix the underlying leak. We test the system, tell you which situation you're in, and quote both the repair and replacement path when both are realistic options.
Where We Work
Pressure Tank Service Across Granbury & Weatherford
We repair and replace pressure tanks, switches, and control boxes throughout Granbury and the Lake Granbury communities and across Weatherford and rural Parker County.
Common Questions
Well Pressure Tank Questions We Hear Often
What does short-cycling mean, and why is it bad?
Short-cycling is when your well pump turns on and off rapidly instead of running a normal cycle — sometimes several times a minute. It's almost always caused by a waterlogged pressure tank or a failing pressure switch, and it's hard on the pump: motors and starting components wear out much faster under that kind of repeated on/off stress.
How do I know if my pressure tank is waterlogged?
The clearest sign is short-cycling — the pump kicking on and off in quick bursts rather than running for a normal stretch and resting. You may also notice pressure that swings noticeably as fixtures run. A waterlogged tank has lost its air charge, usually from a failed bladder, so it can no longer smooth out the pump's on/off cycle the way it should.
Why is my water pressure low even though the pump seems to be running?
Low pressure with a pump that sounds fine often points to the pressure tank or switch rather than the pump itself — a weak air charge, a switch set too low, or a partially clogged line can all cause it. It can also be a sign the pump is aging and losing output. We test the whole chain rather than guessing at one part.
Do you repair pressure tanks or only replace them?
Both. A weak air charge can sometimes be recharged, and a bad switch or control box can often be replaced on its own. But once a bladder has actually failed, the tank itself needs replacing — we'll tell you honestly which situation you're in before recommending either option.
No Water? Low Pressure? We Answer the Phone.
Same-day well service across Granbury, Weatherford & rural Hood and Parker County.